500kw Micro Francis Pelton Turgo Mini Hydro Power Plant

• Customization: Available
• After-sales Service: Installation Guide Service
• Warranty: 1 Year
• Model NO.: HL90-WJ-100
• Output Type: AC Three Phase
• Size: Small
• Type: Vertical Hydro Generator
• Bearing Support: Hanging Type
• Speed: Low Speed
• Bearing Number: 1
• Standard: Nonstandard
• Water Head: 110.5m
• Design Water Flow: 0.481cubms/Sec
• Power Capacity: 1250kw
• Sychronous Generator: Sfw1250kw-8/1430
• Rotating Speed: 750rpm
• Speed Governor: Glywt-600
• Runner Material: Zg0cr13ni4mo
• Runner Diameter: 0.32-4m
• Transport Package: Standard Chinese Exporting Package
• Specification: SGS, ISO, TUV, BV
• Trademark: WAWUSHAN
• Origin: Sichuan, China
• HS Code: 85023900
• Production Capacity: 180 Sets Per Year
• Package Size: 100.00cm * 100.00cm * 100.00cm
• Package Gross Weight: 2500.000kg

Product Description

Product Description

Mini water turbine with high quality
/Mini water turbine generator unit for hydro power plant

Francis Turbine is a reation turbine, is the most common Turbine in use today. The Francis Turbine produced by our company are widely used with simple structure, small size, low cost and high efficiency.
Water head range: 30m~700m
Specific speed: 50~300rpm
Largest capacity of single Francis Turbine: 12000KW.
Reaction turbines
Reaction turbines are acted on by water, which changes pressure as it moves through the turbine and gives up its energy. They must be encased to contain the water pressure (or suction), or they must be fully submerged in the water flow.
Newton's third law describes the transfer of energy for reaction turbines.
Most water turbines in use are reaction turbines and are used in low (<30m/98 ft) and medium (30-300m/98984 ft) head applications. In reaction turbine pressure drop occurs in both fixed and moving blades.

Impulse turbines
Impulse turbines change the velocity of a water jet. The jet pushes on the turbine's curved blades which changes the direction of the flow. The resulting change in momentum (impulse) causes a force on the turbine blades. Since the turbine is spinning, the force acts through a distance (work) and the diverted water flow is left with diminished energy.
Prior to hitting the turbine blades, the water's pressure (potential energy) is converted to kinetic energy by a nozzle and focused on the turbine. No pressure change occurs at the turbine blades, and the turbine doesn't require a housing for operation.
Newton's second law describes the transfer of energy for impulse turbines.
Impulse turbines are often used in very high (>300m/984 ft) head applications.

type	water head	install capacity
Francis turbine	20-300M	50KW-20MW
Pelton turbine	80-1000M	50KW-20MW
kaplant turbine	3-45M	50KW-10MW
Turgo turbine	30-400M	50KW-10MW