| Customization: | Available |
|---|---|
| After-sales Service: | Installation Guide Service |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The Pelton turbine is a type of free-jet resp. impulse turbine which convert the pressure energy of water into kinetic energy entirely in the distributor. Pelton turbines are used at large heads and relatively low flow rates. The turbine power is adjusted by means of the nozzle cross-section. In practice, Pelton turbines are used for driving synchronous generators, where they run at constant speed.
The experimental unit consists of the Pelton wheel, a needle nozzle used as distributor, an adjustable band brake for loading the turbine and a housing with a transparent front panel. The transparent cover enables you to observe the water flow, the Pelton wheel and the nozzle during operation. You can change the nozzle cross-section and thus the flow rate by adjusting the nozzle needle.
The pressure at the turbine inlet is recorded with a pressure sensor. A force sensor and a speed sensor are attached to the band brake. Thus, the mechanical power output of the turbine can be determined. Speed, torque and pressure are displayed on the switch cabinet and processed further in the software.
Francis turbines may be designed for a wide range of heads and flows. This, along with their high efficiency, has made them the most widely used turbine in the world. In contrast to the Pelton turbine, the Francis turbine operates at its best completely filled with water at all times. The turbine and the outlet channel may be placed lower than the lake or sea level outside, reducing the tendency for cavitation.
| Material | Steel plate/Stainless steel |
| Shaft type | Vertical/Horizontal |
| Power range | 50KW-20MW |
| Speed range | 150RPM-1000RPM |
| Inlet direction | Vertical/Horizontal |
| Frequency | 50hz/60hz |
| Efficiency | 85%-93% |
| Runner range | 30cm-200cm |
| Guide vane | Counter Weight |
| Application | On-grid/Off-grid |
Why choose us?
1.More than 30 years of industry experience, install commissioning more than 150 equipment each year
2.Provide complete proposal for hydro power plant from water to wire
3.Abundant foreign power plant project implementation experience
4.Design and manufacture of hydro power generator with voltage 400V
Hongya Power Generating Equipment To Utilities Limited(HPGE), is a professional manufacturer with 16 years experience of mini hydraulic generator generator set.HPGE have 200 workers, which the R&D part is 25%.
We have the equipment inclueded: Francis, pelton, turgo, Kaplan turbine, synchronous generator, speed governor, brushless excitor, hydraulic hardware etc with unit turbine generator set capacity under 20mw.HPGE offer a comprehensive range of hydroelectric power plant service such as: Project consultant of mini Hpp; Site management studies; equipment Design; Hydroelectric equipment Manufacture; Project management; Installation guidance; Commission and start operation; Operation guidance; Hydroelectric equipment maintenance etc.
We cooperate with more than 300 hydro power plants with more than 600 turbine generators sets, areas covering more than 20 provinces of China and also international markets such as Russia, Belarus, Turkey, Albania,Vietnam Indonesia, Nepal, Laos, Sri Lanka, Cuba and Brazil,France, South Africa etc.
1.You are a trading company or a manufacture?
We are a hydro turbine generator manufacture with over 15 years of experiences, Our factory is in the Sichuan you will take 2 hours driving after you reach Shuangliu Airport, pay a visit to our factory you will know more about us.
2.What Kind of water turbine should I choose?
We need to know water head, flow rate, voltage level, frequency, on-grid or off-grid running, automation level from you to work out the solution.
3: Can you do the EPC for the hydro power plant?
Yes, We can design, producing and install the equipment, we will dispatch technologist and workers to install the equipment.
4: what the packing of the equipment?
We will use wooden box to protect product
){kind=link}