Mini Small Hydro Generator 100kw 200kw 500kw Francis Pelton Kaplan Water Turbine

• Customization: Available
• After-sales Service: Installation Guide Service
• Warranty: 1 Year
• Model NO.: ZDJJP-030
• Output Type: AC Three Phase
• Size: Medium
• Type: Horizontal Hydro Generator
• Bearing Support: Umbrella Type
• Speed: Medium Speed
• Bearing Number: 1
• Standard: Nonstandard
• Packaging: Export Standard
• Efficiency: 90%-95%
• Voltage: 400V-6300V
• Frequency: 20Hz, 60Hz
• Turbine Type: Francis, Turgo, Kaplan, Pelton
• Power Design: 50kw-20MW
• Water Head: 20-300m
• OEM: Welcome
• Lifespan: 30 Years
• Transport Package: Standard Wooden Cases
• Specification: ISO 9001`2008
• Trademark: Wawushan
• Origin: Sichuan
• HS Code: 5820039
• Production Capacity: 200 Sets Per Year
• Package Size: 100.00cm * 100.00cm * 100.00cm
• Package Gross Weight: 2500.000kg

Product Description

Product Description

Turgo turbine
Inclined -jet turbine is mainly suitable for power stations with high head and low flow. Water flow from the reservoir or pressure pool through the diversion pipe, and then through the nozzle at a high speed on the blade of the circumference of the runner, driving the runner to rotate. After the water passes through the runner, it falls into the tailwater tank under the housing and then drains into the downstream channel. The inclined-jet turbine is used for small hydropower stations with a water head of 20-200m, which drives the hydrogenerator to rotate and generate electrical energy. The inclined-jet turbine has vertical shaft, horizontal shaft arrangement, bearing, bearing shell structure and automatic, manual and electric speed regulation.

The unit axis of the runner blade of the inclined flow turbine is inclined. Thus, in the region of the runner, the water flows in a direction that is inclined to the axis of the unit.The inclined volute is welded to the seat ring of the cast-welded structure, and the twelve seat ring struts are inclined to the horizontal line by 35°. The inclined guide water mechanism with 45° inclination Angle is composed of 24 guide blades, guide vane transmission mechanism, turbine top cover 4 and the bottom ring of the water guide mechanism. The guide vane of the double-supported structure has a symmetrical airfoil that varies with height. The guide vane bearing is a wooden bearing, which is automatically lubricated by the water in the flowing part. In order to prevent water leakage, a rubber bowl is installed in the upper journal. The guide vane transmission mechanism is composed of a swivel arm, a connecting rod hinged with a ball pin and a control ring hinged with a ball pin. The control ring is connected to two circular actuators by special hinges.
A wheel chamber welded from a die forged stainless steel plate with a finished inner surface. The ten blades of the runner are cast from stainless steel at an Angle of 45° to the axis of the main shaft. The scraper relay drives the rotating blade mechanism by operating the shaft, so as to make the blade rotate. The blade Angle is 30°.
Because the volute and the seat ring are also inclined, the flow passage from the volute to the draft pipe is relatively straight, so it can not only improve the efficiency of the turbine, but also reduce the plane size of the unit.

Advantages of Turgo turbine
1.High efficiency
The inclined-jet turbine can use the kinetic energy of the water flow to convert it into mechanical energy, so as to generate electric energy, and an investment can obtain long-term effective return, with high economic benefits.

2. Low cost
The construction cost of inclined-jet turbine is lower than that of traditional hydropower, mainly because its equipment is simple, easy to manufacture and maintain.

3. Well-adapted
Inclined-jet turbine is relatively flexible and adaptable in the selection of installation location and equipment scale, and can meet different regions and electricity needs.




Company prifile

Production capabilities	Production lines                                       6	Production machines                                          40
Quality control	Product Support traceability of raw materials                                     Yes  Quality control conducted on all production lines                                     Yes	Product inspection method Inspection of all products                            QA/QC inspectors                                           4
Trade background	Main markets     Domestic Market(88%), Southeast Asia(9%), South Asia(2%)	Main client types               Retailer, Engineer, Manufacturer
R&D capabilities	Customization options     sample processing, graphic processing, customized on demand                         R&D engineers                                   6	New products launched in last year                                         15               R&D engineer education levels                   5 graduate, 1 juniorCollege