Hydro Power Kaplan Francis Turbine Generator 500kw 1000kw 2500kw

• Customization: Available
• After-sales Service: Installation Guide Service
• Warranty: 1 Year
• Model NO.: ZDJP502-LH-200
• Output Type: AC Three Phase
• Size: Small
• Type: Vertical Hydro Generator
• Bearing Support: Hanging Type
• Speed: Low Speed
• Bearing Number: 2
• Standard: Nonstandard
• Brand: Wa Wu Shan
• Frequency: 50Hz/60Hz
• Turbine Efficiency: up to 90%
• Generator Efficiency: up to 93%
• Lifespan: 5 Years
• Runner Material: Zg0cr13ni4mo
• MOQ: 1 Set
• Packaging: Chinese Exporting Standard
• Service Offered: OEM, ODM..
• Runner Diameter: 0.32-4m
• Transport Package: Standard Chinese Exporting Package
• Specification: SGS, TUV, BV, ISO
• Trademark: WAWUSHAN
• Origin: Sichuan, China
• HS Code: 85023900
• Production Capacity: 180 PCS/Year

Product Description

Product Description

Kaplan turbine / Axial flow propeller turbines/ vertical turbine

Kaplan turbine is a kind of turbine suit to low water head 3-45 meters, and with certain big flow, normally divided into 
fixed blades and adjustable blades turbine. Main components 
including: runner, draft cone, water chamber, guide vane, 
bearing, and main shaft. The spiral case could be steel or 
concrete. The runner diameter we can manufacture is from 
80cm to 4meters, with rated output 50Kw to 20Mw.
Turbine units normally be vertical shaft arrangement. 
Generator equipped with same or different shaft, 
they will share the same rotating speed. If specially 
required, a speed increase gear could be equipped 
between turbine and generator in order to smaller the generator size.

Before you can begin planning your systems or estimating how much power you'll produce, you'll need to make four essential measurements:

1. Head (the vertical distance between your intake and turbine)

2. Flow (how much water comes down the stream)

3. Pipeline (Penstock) length

4. Transmission Line length

In this section, we'll discuss how to make these measurements and how they affect the design and efficiency of your hydro system.


Kaplan runner with 3 to 6 blades, fixed blades runner, 
blades are casted and then welded on the runner hub, 
and bolts connection with draft cone. Regarding the 
adjustable blades runner, the hub is designed to be 
hollow, and a control rod is designed in the shaft middle 
to change blades angle in order to suit different flow.
Runner material: stainless steel, or other specified by the client
Kaplan runner has been manufactured by us all this high strength, 
higher efficiency, and longer service life. The factory tests including
 static and dynamic balance test, UT test, and dimension measurement.
 

type	water head	install capacity
Francis turbine	20-300M	50KW-20MW
Pelton turbine	80-1000M	50KW-20MW
kaplant turbine	3-45M	50KW-10MW
Turgo turbine	30-400M	50KW-10MW

.